Choosing a cutting blade for laminate flooring can be extremely tricky. Many people assume that buying a single saw blade would fulfill all types of cutting needs. But in reality, it needs to be understood that not every type of blade is suitable for all types of cutting jobs.
Laminate flooring is thicker and contains traces of aluminum oxide, and thus can end up destroying any saw blade within no time. You might attempt using an ordinary blade, but no matter how sharp your blade is, the saw will end up taking too much pressure and then giving up after damaging the laminate floor’s surface as well.
The solution? Invest in the right circular saw blade for laminate flooring. These saw blades are specifically designed while keeping laminate flooring in mind. As a result, these blades can glide through the material leaving clean and accurate cuts without taking a toll on the saw blade.
Best Laminate Flooring Circular Saw Blade Reviews 2022
If you too are in search of a circular saw blade for laminate flooring, look no further. We are sharing the top five product picks that have been found to be extremely effective and reliable.
1. Freud LU79R010 Thin kerf Blade
This blade is made out of high density carbide which is a thick and sturdy metal. The construction and material enhance the strength of the blade so that it can easily glide through strong laminate flooring and cut it in one go.
Carbide construction is also an excellent choice since it ensures that the 80 teeth of the saw blade remain sharp for long and do not get dull easily. The bevel teeth design also facilitates the users by allowing them to take full control over the blade.
The tooth design ensures that the cut is clean and the edges of the material do not splinter. A couple of anti-vibration slots have been laser embedded into the blade so it can expand when the blade heats up and vibration can be reduced as much as possible.
To further enhance the durability of the blade and ensure that you will be able to use it longer, it has been coated with a Perma Shield that prevents corrosion and also reduces blade drag.
2. Bosch DCB1072 Circular Blade
The shape and design of this saw’s teeth is the most prominent feature of this saw blade. The triple chip grind 75 teeth will split and cut laminate flooring in a matter of seconds. The inclined design makes them stronger while the gap ensures that the bits of laminate do not get stuck in the saw blade teeth while cutting.
The teeth also contribute to the quality of the cuts since they make the cuts in an aligned manner to leave smoother edges without any splintering. The negative hook design also plays an integral role in preventing chipping.
Made out of steel, the blade features a very hard body that is stable and sturdy. This paired with the thinner kerf design make the blade very easy to use. The blade cuts quite close to the target and prevents material waste and leads to accurate and precise cuts.
3. Freud D1296L Circular Blade
This laminate flooring blade is made out of a blend of carbide and low cobalt content. This combination adds to the strength of the blade and makes it reliable and sturdy. The hardness of the blade is one of the reasons why it can move through even thick laminate flooring in a single attempt.
Both sides of the blade have been laminated and covered in melamine to reduce drag and friction. This way, the users do not have to push or exert pressure on the saw blade, rather, it conveniently moves through the laminate flooring on its own.
Some other notable features of this saw blade include a Perma shield coating, that prevents corrosion and rusting, anti-vibration reeds, to reduce vibrations when using this saw blade. There are also some heat expansion slots on the body of the blade. These slots allow room for expansion in case the blade heats up when in use.
This mechanism comes in handy to allow the blade to be used for longer and also prevents warping. The thin kerf design further amplifies the performance of the blade and allows it to be used with both tables as well as miter saws.
4. Norske Tools NCSBP272 Blade
Made for clean cuts, the finish of the cuts made through the Norske Tools NCSBP272 Melamine Plus Saw Blade is unmatched and unparalleled. The 60 teeth on the blade allow the blade to make cuts that are smooth and clean.
The tips of the teeth are made out of carbide so that they remain strong and do not bend, warp or corrode easily. They are placed at an angle of 35 degrees so that they can cut through the wood fibers with ease. The very same blade can be used to cut through melamine, laminate, laminate floors as well as hard woods.
The noise production and vibration of this saw blade is also reduced thanks to the expansion slots that are laser cut into the body of the blade. These slots reduce noise and also prevent the overheating of the blade. Since the blade overheating is managed accordingly, therefore, the risk of the blade warping or bending is also reduced by a significant factor.
5. Freud D1216LF Circular Blade
Looking at the blade in the first go, you will immediately realize that the shape and the structure of this blade is quite unique. The unique shape and structure is the reason behind the durability as well as the cut quality of the blade.
The shape of the teeth also increases the durability of the saw blade so that it can last ¾ times longer as compared to other saw blades.
This blade is quite stable thanks to the laser cut slots that have been added to the design of the blade. These slots manage heat expansion and also reduce the production of heat and vibration in the blades.
This also makes the blades easy to control and thus the user ends up making precise and accurate cuts. The anti-kickback design of the teeth also contributes to the performance of this blade as it reinforces and strengthens the teeth of the blade so that the blade’s life can be extended.
How to Cut Through Laminate Flooring Smoothly And Neatly?
Cutting through laminate flooring may seem like a tedious and tiring task. But in reality, it is quite simple and easy. Since laminate flooring is tougher as compared to other wood, make sure that you use a relevant laminate flooring cutting blade with your saw.
Before actually proceeding to the cutting, you should first mark the laminate flooring with a piece of chalk or a pencil. Now install the laminate flooring on your cutting surface and clamp it tightly so that it does not move around or slip while you cut.
Once you have marked and secured the laminate flooring, you can now install the blade into your saw and then start cutting. Cut along a straight line and try to hold the saw as study and still as possible. Do not push the saw harshly through the material as this might cause splintering.
After making the cut, you can examine the surface. If you find some splinters, smoothen the edges with a buffer and your laminate flooring will come out clean and smooth as ever.
Buying Guide To Pick The Right Laminate Flooring Saw Blade
There is a huge range of saw blades in the market that are advertised as being suitable for cutting laminate flooring. But you cannot simply trust any saw blade that you come across. Here are some things that you should take into consideration so you make a wise choice and pick the right saw blade that can actually cut through laminate flooring.
The material out of which the blade has been made is a very important factor that cannot be ignored at any cost. When picking a blade, you should be looking for one that is made out of a tough and durable material. Carbide is highly recommended as it is tough and does not bend or get damaged easily. Plus the material also allows the blade to move through laminate flooring with ease with minimal resistance so the user does not have to put in a lot of effort or push the saw through.
- Teeth And Design
The major component of the blade that is responsible for the actual cutting is none other than the teeth of the blade. You need to find a saw blade that comes with angled teeth so that the blade does not get stuck due to the small pieces of the wood being trapped inside the teeth.
The teeth should also be reinforced so that they do not bend easily and can move through the material while cutting all the wood fibers in a uniform way, to leave a splinter free and smooth surface behind.
- Resistance And Drag
Some blades are quite hard to push into the material. This is because they do not come with a coating to reduce their resistance and drag. Always check and ensure that the blade you are picking has a Perma Shield coating.
This coating not only makes it easy for the blade to move through the laminate flooring but also reduces the chances of the corrosion and rusting of the blade thus extending its life and durability.
Now whenever you are in search of a saw blade to cut through laminate flooring, you will be able to pick a saw blade that is easy to use, durable and will lead to clean and smooth cuts. We have compiled a list of the top five products in the market that have been thoroughly tested and found effective in terms of cutting laminate floors.