Using a circular saw can be messy. The circular saw is extremely powerful, to an extent that when it cuts through the wooden fibres, it turns them into fine dust particles. These dust particles then end up flying around or accumulating on the work surface which does disturb the accuracy of the cuts as it makes it hard for the user to see clearly.
Depending on the extent of the cutting and the material that is being cut, at times, the dust particles can also end up clogging the circular saw itself. Therefore, it is important to buy a circular saw with a dust collection mechanism as it will collect all the dust, leading to a cleaner work surface and will also reduce the chances of you making wrong cuts.
Top 7 Best Circular Saws Dust Collection Mechanism 2022
Realizing the significance of a circular saw blade with a dust collector, many people want to get one for their use. There are a lot of such products in the market. But to help you pick the best one possible, we reviewed some of the best ones and compiled a list that consists of all the products that are reliable and dependable. So here are our top seven picks in this regards:
Here is my list of the Best Circular Saws With Dust Port in 2021;
1. Makita 5057KB Circular Saw
If you are looking for a powerful circular saw that can be used to get more work done within a small amount of time and also the one that can collect dust, try the Makita 5057KB circular saw.
Equipped with a 13 amp motor, this saw is so powerful that you will be able to cut through five stacks of wood in one go when using it. The circular saw supports bevel cuts lying between the angles of 0-45 degrees. The blade of the saw is held in place by the shaft lock that holds it strongly so the blade does not come off or get loose when in use.
The mechanism and design of the saw is such that it already reduces the production of dust when in use. But the little bit of dust that the saw might product will be cleaned up and collected by the dust collector mechanism.
The bearings and switches of the saw are covered and made out of a dust proof material so the dust produced does not affect the performance of the circular saw. Other than angled cuts, the saw also comes with a rip fence that allows the users to make cleaner and straight cuts. All in all, the circular saw comes with diverse usage.
2. SKILSAW SPT70V-11 Worn Drive Circular Saw
The lumber thickness of 6-¼ inches enhanced the cutting capacity of the circular saw. The saw can be used to make cuts that are six times cleaner as compared to other circular saws in the market. The motor of the circular saw is quite strong and durable. Therefore, the circular saw can be used for both personal as well as commercial scale cutting projects.
The bevel angle range of 0-45 degrees further increases the usability of the circular saw. And not to mention, the dust collector, that keeps the work surface clean by collecting dust and ensuring that the work surface remains clean and clear.
The footplate of the circular saw is made out of a strong and durable magnesium die cast. This enhances the strength of the footplate and also allows the circular saw to make clean and accurate cuts.
3. Bosch CS10 Circular Saw
Bosch is not a new name when it comes to power tool manufacturers. Just like their other tools, the Bosch CS107-¼ inch Amp Circular Saw is also an excellent investment. Driven by a powerful motor of 15 amps, the circular saw allows the users to make a variety of cuts.
The powerful motor drives the blades at a rapid speed and thus reduces the production of dust. The little dust that will be produced will be collected by the dust collector to provide a better viewing angle and a cleaner work station.
Another amazing feature of this circular saw is the fact that it comes with on-tool wrench storage. You can keep the tools that you use frequently in the storage so that you can reach out to them and use them with ease rather than having to grab them everytime you need to use them.
The footplate of the circular saw is also sturdy which allows the users to take control of the circular saw and thus make accurate and precise cuts.
4. Metabo HPT C7UR Circular Saw With Dust Blower
The package comes with everything that you need to use the saw. The saw, vpr blade, hex bar wrench as well as the carrying bag is included in the parcel so the users do not have to buy anything separately.
The 15-amp motor easily drives the blade and allows it to cut through the material in a single attempt. Moreover, the speed of 6800 RPM further increases the speed of the circular saw and enhances the efficiency of the circular saw by an additional 40 percent.
The bevel angle of the circular saw can be adjusted within the range of 0-55 degrees with stops at 45 and 55 degrees respectively. These features allow the users to take control over the circular saw and thus the users have the ability to control the saw as per their liking and the requirements of the projects that they are working on.
The cut capacity of the saw is also quite impressive which surely enhances its usability. The excellent control of the circular saw is also due to the low vibration feature of the circular saw which allows the users to take control over the circular saw.
The design of the handle is also quite ergonomic so it does not slip away and the users can grab it even for a longer time period without experiencing any sort of discomfort.
5. SKILSAW SPT67FMD-01 Circular Saw
This circular saw comes with a dust collector that is embedded into the design of the saw. Thus, the users do not have to go through the hassle of installing a mechanism separately or go through the tedious process of collecting the dust or cleaning the workstation manually.
Other than the dust collector, you will also find a hose and cord sleeve that protects the components of the circular saw from dust accumulation and prevents damage.
The circular saw is driven by a powerful motor of 15 amps. Therefore, the motor drives the blade at a rapid speed but operates in a manner that the users do not have to worry about their motor getting overheated or damaged otherwise.
The bevel angle range of this circular saw ranges between 0-55 degrees along with bevel stops so that the users can have maximum control over this circular saw.
Last but not the least, this is one of the lightest circular saws that you will find in the market as it weighs merely 9 pounds which makes it easier to carry around and quite portable as well.
6. Rockwell RK3440K Circular Saw
The Rockwell RK3440 Versacut is a circular saw that is compact yet durable and useful. It is a multifunctional power tool that can be used for a wide range and variety of projects.
Other than the angle and types of cuts, this saw can also be used to cut through different types of materials, including but not limited to, wood, tiles, plastics and even flooring.
This circular saw is equally recommended for both newbies as well as experienced professionals.
The laser cut guide allows the users to visualize the exact position of the cuts so that they can make clean and more accurate cuts. This also prevents material wastage and enhances the precision of the cuts made when using this circular saw.
7. VonHaus Circular saw
The design of this circular saw is one of the best ones in the market. This circular saw is compact, lightweight yet powerful. What else could one ask for when searching for a circular saw?
The speed of 3000 RPM allows the saw to move through the material being cut in a smooth manner and thus makes clean cuts with a smooth surface.
The versatility paired with the ease of use of this circular saw make it an excellent investment. And not to mention the dust collector that will capture the dust produced during cutting, leaving the work surface clean and clear.
The slim grip handle of the compact circular saw is easy to get a hold of. Therefore, you will easily be able to move this circular saw and make cuts at an angle as well as in a straight line.
The Benefits of Dust Collector Circular Saws
- Accurate Cuts
There are plenty of circular saws in the market. But if you are someone who requires clean and accurate cuts, it is important for you to ensure that your work surface and the viewing angle remains as clean and clear as possible. However, ensuring this is almost impossible as circular saws produce too much dust that can accumulate over the working area and also clog the circular saw blade.
- Dust Collection
A circular saw with a dust collector is highly recommended since the dust collection mechanism collects the dust so that the work surface can remain clean and clear. Moreover, naturally, these circular saws are designed in a way that the blade rotates at a very fast speed and thus the blade can move through the material that is being cut neatly while reducing the production of dust as much as possible.
Since these circular saws collect dust, therefore, they automatically lead to more clean and accurate cuts. Therefore, if you are someone who needs to make cleaner and neat cuts, investing in a circular saw would be an excellent idea for you.
- Easy Cleanup
Using a circular saw with a dust collector also makes the cleanup process easier. The dust is collected and stored in a separate bag. When you are done cutting, you can simply dust off the remaining dust from the work surface, remove the bag with the dust and then dispose of it off.
The time spent on cleaning the work station when using a circular saw with a dust collection mechanism is a lot less than the time that is spent in the clean-up process otherwise.
A circular saw with a dust collection mechanism is a product you will never regret buying. These circular saws are easy to control and powerful. Plus the versatile use allows the saw to be used for a wide range of purposes. But the biggest perk of using these saws is the fact that they keep the work surface clean and allow the users to make accurate and precise cuts while also preventing the saw itself from dust damage.